This web site is under construction and contains details of products that will become available in 2024. Details of current DryFire products may be found at: www.dryfire.com

Pre-purchase checklist

Please use this checklist to ensure you have everything required to use your system when it arrives.

DryFire Projection System (DPS)

DPS comes with:

• DPS Sensor Unit.
• Standard Gun Assembly (SGA) with wrap round trigger switch.
• A type A to micro USB charging cable.

Optional:

• TS22 behind-the-blade trigger switch.
• DPS-AM mount for the DPS sensor unit.

  Note: to assemble the DPS-AM you will need:

  • Pozi 2 screwdriver.
  • 3/16" Allen key/wrench.
  • 4mm Allen key/wrench with a shaft length >80mm.
• Additional Standard Gun Assemblies (SGA) and a Friends or Troop pack if you are shooting with a group.

You will also need:

• A suitable Windows or Apple Mac PC or laptop.
• A suitable space or room with subdued lighting.
• A mains extension block long enough to power your PC/laptop, projector and USB charging plug.
• A wall or screen at least 3m wide to project the image of the layout and target.
• A suitable PC data projector.
• An HDMI cable long enough to connect your PC/laptop to the projector.
• A longer type A to micro USB charging cable if you wish to have the DPS Sensor Unit on charge during use.
• A charging plug - if you do not wish to charge from your PC or laptop.
• A surface or tripod on which to mount the DPS Sensor Unit.
• A surface on which to place your PC or laptop - within easy reach while using the system.
• A tape measure.

DryFire Laser System (DLS)

DLS comes with:

• DLS two head simulator.
• Standard Gun Assembly (SGA) with wrap round trigger switch.
• Mains power supply with 5V output.
• 2m type A to type B USB cable.

Optional:

• TS22 behind-the-blade trigger switch.
• DPS_AM mount for the DPS sensor unit.
• Additional Standard Gun Assemblies (SGA) and a Friends or Troop pack if you are shooting with a group.

You will also need:

• A suitable Windows or Apple Mac PC or laptop.
• A suitable space or room with subdued lighting.
• A mains extension block long enough to power your PC/laptop, projector and simulator.
• A wall or screen at least 3m wide for the laser targets.
• You may require a longer type A to type B USB cable depending how far the simulator is from your PC or laptop.
• A surface, or tripod, on which to mount the simulator.
• A surface on which to place your PC or laptop - within easy reach while using the system.
• A tape measure.
• A pad of Post-It sticky notes.